Product search
Alt text

Outdoor

Installation

01

How can I install Atlas Concorde porcelain stoneware outdoors?

Atlas Concorde porcelain stoneware can be installed in different ways depending on the material's thickness. Materials with 8/9mm and 20mm thickness can be laid on screed with adhesive following the instructions at the following link and the recommendations provided by the adhesive and grout manufacturer. This installation method is suitable for areas subject to vehicle traffic. The 20mm thick material, thanks to its substantial mechanical characteristics, offers superior technical performance. 

https://www.youtube.com/watch?v=PEjxS_yHdgw 

The 20mm thick material can also be dry installed on a gravel bed as shown in the following video. This method is suitable for areas not subject to vehicle traffic. 

https://www.youtube.com/watch?v=X7u1ebXUxkE 

The 20mm thick material can be installed as raised outdoor flooring using the following method. This method is suitable for areas not subject to vehicle traffic. 

https://www.youtube.com/watch?v=dphO3osq-cM 

Cleaning

01

How can I clean Atlas Concorde porcelain stoneware outdoors?

POST-CONSTRUCTION CLEANING 

The construction site is considered complete when it is free from any tools/materials resulting from the work. To reduce the risk of damage to the tiled surface, it is necessary to protect it and avoid the presence of abrasive materials. After a few days, remove construction residues with a commercial sponge such as Scotch-Brite® or with a scrubbing brush or single-brush machine (for large surfaces). For wall coverings, use a neutral detergent diluted in warm water. For floors, use a buffered acid detergent, in a variable dilution percentage depending on the type of surface (smooth or textured). It is important to proactively protect any marble or metal inserts with adhesive tape. Then rinse thoroughly with clean, warm water until any streaks or residue in the gaps are removed. If necessary, repeat the acid wash at higher concentrations except in cases where there are marble or metal inserts. Avoid using diluted hardware store acids. 

ROUTINE MAINTENANCE 

It is recommended to use a common neutral detergent diluted in water. Avoid using acidic, alkaline, waxing and/or impregnating products and metal scouring pads (iron and steel sponges). In case of more intense dirt or particularly textured surfaces, use an alkaline-based detergent, rinsing at the end of washing. For large surfaces, the use of scrubber dryers is advisable. 

EXTRAORDINARY MAINTENANCE 

In the case of dirt traces resistant to ordinary cleaning, the use of an appropriate detergent is recommended depending on the type of dirt: 

TYPE OF DIRT (resistant to ordinary maintenance) 

  • Carbon, calcareous efflorescence, plaster, metallic marks, rust, graphite, wall paints 

Use acid-based detergents 

  • Coca cola, coffee, wine, beer, ice cream 

Use alkaline-based detergents 

  • Resins, silicone or mechanical oils, candle wax, paint 

Use Solvents 

  • Tires, rubber soles, suction cup marks 

Use basic abrasive paste detergents 

*Caution: acid-based products can corrode marble, granite, natural stones, and metals, therefore avoid their use in case of decorations or inserts made of these materials. 

The cleanability characteristics of materials vary significantly for different installation methods, conditions of use, types of surfaces, and environments. In general, as the anti-slip characteristics of the tiles increase, cleaning difficulties increase. The professional operator in charge of maintenance and cleaning should always perform a preliminary empirical test (possibly on a portion of uninstalled material) for each specific type of intervention. In the case of particularly harsh conditions of use (for example, mechanical workshops or environments with a strong presence of oily residues and tire marks), incorrect installation, or cleaning performed inadequately, Atlas Concorde disclaims any responsibility regarding the effectiveness of cleaning and maintenance operations. Atlas Concorde cannot be held responsible for events, damages, or defects due to incorrect installation, negligent cleaning and maintenance, or inadequate choice of the type of materials installed and adhesives used with regard to their intended use. 

Hadling

01

What are the recommendations for handling Atlas Concorde porcelain stoneware for outdoors?

Atlas Concorde recommends handling the material using special mechanical grip handles or suction cups, as well as wearing appropriate PPE (gloves, safety footwear, etc.). For laying larger and heavier formats (e.g., 120x240 20mm), there is also the possibility of laying the material using special motorized equipment.

Cutting

01

How can I cut Atlas Concorde porcelain stoneware for outdoors?

To cut 20mm thick Atlas Concorde porcelain stoneware, it is advisable to use a water cutter with a power of at least 1.5HP and a 20-25cm diamond blade.